The wear of the transmission parts of the centrifugal fan is a common equipment problem, including the bearing position of the exhaust fan, the wear of the bearing chamber, and the wear of the bearing of the blower shaft. In view of the above-mentioned failures of centrifugal fans, traditional repair methods include surfacing, thermal spraying, and brushing, but they all have certain drawbacks: the thermal stress generated by the high temperature of repair welding cannot be completely eliminated, and it is easy to cause material damage and cause components to bend or break; However, electric brush plating is limited by the thickness of the coating, which is easy to peel off, and the above two methods use metal to repair the metal, which cannot change the "hard-to-hard" coordination relationship. Under the combined action of various forces, it will still cause the rubber drum Worn again.

Contemporary Western countries mostly use polymer composite repair methods to solve the above problems, and the most used is the American Fluorescence Blue technology system, which has super adhesion, excellent compressive strength and other comprehensive properties, and can be disassembled and machine-free. Processing. There is no thermal stress of repair welding, and the repair thickness is not limited. At the same time, the product has a retreat that the metal material does not have. It can absorb the shock and vibration of the equipment and avoid the possibility of re-wearing. It is used in the domestic application of centrifugal fan failure repair Also gradually replace traditional methods.













